Comparison of Two Manual Methods of Nitrogen Dioxide Determination in Ambient Air

Sodium arsenite (modified Jacobs and Hochheiser method; hereafter referred as SA), the most widely used manual monitoring method for determination of nitrogen dioxide (NO₂) in ambient air, particularly in developing countries has been evaluated and compared with US EPA recommended equivalent method of TGS-ANSA (hereafter referred as ANSA). NO₂ concentrations generated from laboratory test atmosphere were analyzed by these two methods and were compared statistically. Laboratory evaluations showed that SA method has high sensitivity to different sampling conditions, which normally vary during actual field monitoring. Hence, correction factors for absorption efficiency were estimated for SA and ANSA methods. Absorption efficiency of NO₂ in SA method was found to be much lower (64%) as against the reported value of 82% at the method recommended sampling conditions, whereas for ANSA method, it was found 1.0 as against the reported value of 0.93. After applying derived correction factors, both the methods produced almost similar concentration values of NO₂.     

冷凝吸附法测定痕量挥发性含硫气体

采用冷凝吸附法对痕量挥发性含硫气体的测定进行了研究 ,结果表明自行设计的冷凝吸附装置对于痕量挥发性含硫气体的富集有着良好的效果 ,富集效率可达 94%以上     

Cu、Pb、Zn火焰原子吸收多谱线分析在环境监测中的应用

对铜的 3条谱线 (2 49.2 nm、2 61 .4nm,3 2 4.8nm ) ,铅的 2条谱线 (2 83 .3 nm、2 1 7.0 1 nm )以及锌的 2条谱线(3 0 7.6nm、2 1 3 .9nm ) ,共 7条谱线的灵敏度、检测限、线性范围进行了归纳性总结 ,并对多种共存元素可能存在的干扰情况进行了研究 ,认为利用元素不同分析谱线的分析灵敏度差异 ,根据被测元素在样品消解液中含量 ,选择合适的谱线进行分析 ,既降低工作强度 ,又能获得满意结果     

微波高压络合消解石墨炉原子吸收分光光度法测定环境空气中锑

用有机滤膜采集空气中颗粒物样品,用微波高压络合消解后制成样品溶液。用石墨炉原子吸收分光光度法可确定样品溶液中锑的浓度。该方法具有对有机滤膜和样品消解完全,省时,无损失,灵敏度高,准确度、精密度好等特点。     

氢化物发生原子荧光法测定饮用水中的微量硒

氢化物发生原子荧光法测定饮用水中的微量硒时。仪器条件和试剂的浓度选择很重要。本文对条件的最佳化进行了实验。并对方法的精密度、准确度和检出限进行了讨论。     

过硫酸钾氧化-紫外光度法测定总氮方法的改进

过硫酸钾氧化紫外光度法测定总氮的空白吸光度高的主要原因是：K2S2O3是220nm波长上有特征吸收，适当降低K2S2O3、NaOH的用量，延长消解时间，使用二次蒸馏水，用低浓度亚砷酸钠溶液，还原消解后剩余的极少量的K2S2O3，可以降低空白吸光度。K2S2O3-NaOH碱溶液不稳定，使用期短，三天后氧化能力迅速降低，原因是：K2S2O3溶液中，加入NaOH，加速了K2S2O3的分解。K2S2O3和NaOH分别配制，并在K2S2O3溶液中，加入少量HCl，抑制其水解。两种溶液可使用半年以上时间。     

Determination of arsenic in grain and soil by hydride nondispersive atomic fluorescence method

Quantity of trace arsenic in grain and soil was determined by hydride nondispersive atomic fluorescence method.Optimum conditions of measurement were selected in the experiment including the pH of the medium, reductive agent, the concentration and flowing velocity of KBH4, rate of carrier gas and atomized temperature. The reference sample of rice C was determined and the linear relationship of the calibration curve was plotted, indicating that the method was highly precise. In the experiment of recovery rate, the method was quite satisfactory.Based on the determination of hundreds of samples, it is proved that atomic fluorescence method is rapid, sensitive and low in interference. It is very efficient on determination of trace arsenic in soils and grains, especially in grains.     

不锈钢壳体的冷挤压工艺及模具设计

壳体是机械中广泛使用的重要零件之一.采用冷挤压工艺可提高质量、降低成本.对不锈钢壳体成形工艺及模具设计作了详细讨论.     

恶臭污染防治技术及工程实践

目前，恶臭污染对人类生活的危害日益加剧，文中介绍了几种恶臭污染物的防治技术。对生物滴滤池 活性炭吸附工艺进行了探讨，工程实例表明具有良好的治理效果。     

花键轴冷挤压成形工艺及模具设计

花键轴是机械中广泛使用的重要零件之一。制造工艺复杂,外观质量、尺寸精度、综合机械性能等要求高。采用冷挤压成形,可使成本降低、提高质量、使用可靠。此文对花键轴成形工艺,模具设计作了详细探讨。